Service Areas
01
Steel Fabrication & Installation Across Houston, Dallas, Austin, and Surrounding Markets
Texas Outlaw Welding provides residential and commercial steel fabrication and installation for projects throughout the Houston area, along with select projects in Dallas and Austin.
Our work includes structural steel, custom gates, patio covers, architectural steel, metal buildings, miscellaneous metals, commercial fabrication, and field installation.
Some projects happen close to our Houston base.
Others require our crews to travel for the right scope of work.
We look at the size, complexity, location, fabrication requirements, installation needs, and schedule of each project to determine whether it is a good fit.
Our primary service areas include:
- Houston
- Katy
- The Woodlands
- Dallas
- Austin
If your project is outside one of these areas, contact us. Larger custom residential and commercial steel projects may still be considered depending on the scope.
02
Houston steel projects
Houston is our primary market and home base.
We work with homeowners, custom home builders, general contractors, developers, architects, engineers, and commercial property owners throughout the Houston area.
Our Houston-area work can include:
- Residential structural steel
- Custom steel patio covers and canopies
- Custom gates and entry systems
- Architectural steel and custom metalwork
- Residential metal buildings and outdoor structures
- Commercial structural steel fabrication and installation
- Steel erection
- Miscellaneous metals
- Commercial metal buildings
- Commercial architectural steel
Houston's mix of custom homes, major renovations, commercial construction, industrial properties, and continued development creates a wide range of opportunities for custom steel fabrication.
Our ability to fabricate in the shop and install in the field allows us to support projects from early planning through completion.
03
Katy steel projects
Texas Outlaw Welding serves residential and commercial projects in Katy.
The area includes everything from established neighborhoods and custom homes to growing commercial and business developments.
Residential projects may include:
- Structural steel for custom homes
- Steel for major additions
- Patio covers
- Architectural canopies
- Custom driveway gates
- Architectural metalwork
- Shops and outdoor structures
Commercial work may include structural fabrication, miscellaneous metals, custom steel, metal buildings, and field installation.
We can work from completed project plans or discuss custom projects that are still in the early stages.
04
The Woodlands steel projects
We also serve custom residential and commercial steel projects in The Woodlands.
Properties in The Woodlands often place a strong emphasis on both function and appearance.
That makes custom fabrication especially useful for projects where the steel needs to perform structurally while still fitting the architecture of the property.
Residential work can include:
- Custom structural steel
- Patio covers and canopies
- Gates and entry systems
- Architectural steel
- Custom metalwork
- Outdoor steel structures
Commercial projects may include structural steel, architectural features, miscellaneous metals, and other custom-fabricated components.
05
Dallas steel projects
Dallas is an active growth market for Texas Outlaw Welding.
We currently consider and take on select residential and commercial projects in the Dallas market while continuing to grow our crews and field presence in North Texas.
Our goal is not to present ourselves as a company with a permanent Dallas office when that is not the case.
Instead, we focus on projects where our design, fabrication, and installation capabilities make sense for the scope.
Dallas-area projects may include:
- Custom residential structural steel
- Large patio covers and architectural structures
- Estate gates and entry systems
- Architectural steel
- Custom metal buildings
- Commercial structural steel
- Steel erection
- Miscellaneous metals
- Commercial architectural fabrication
Larger projects are often a better fit because the value comes from the fabrication capability and overall steel scope rather than simply having a welder located nearby.
We are continuing to expand our crews and presence in the Dallas market as project volume grows.
06
Austin steel projects
Austin is also an active expansion market for Texas Outlaw Welding.
We currently take on select projects in the Austin area while continuing to grow our field capacity and crew presence in Central Texas.
The Austin market can be a strong fit for custom steel because many residential and commercial projects call for more design-driven work.
Potential projects may include:
- Structural steel for custom homes
- Modern patio covers
- Architectural canopies
- Custom steel buildings
- Commercial structural steel
- Commercial architectural fabrication
We evaluate Austin projects based on the steel scope, project size, field requirements, and schedule.
For the right project, our Houston fabrication capabilities can support work that is installed by our crews in the Austin market.
07
What we build in each market
Residential Steel Projects
Our residential work is focused on larger custom projects rather than small standalone welding repairs.
We work on projects such as:
- Custom home structural steel
- Major renovations
- Steel patio covers
- Architectural canopies
- Automatic and custom entry gates
- Custom metal buildings
- Garages
- Shops
- Outdoor structures
These projects may begin with engineered plans, architectural drawings, or an early-stage idea.
Commercial Steel Projects
Commercial projects often require stronger coordination between the fabrication shop, field crews, general contractor, and other trades.
Our commercial services include:
- Structural steel fabrication and installation
- Steel erection
- Miscellaneous metals
- Commercial metal buildings
- Specialty steel fabrication
We work from approved project documents and can remain involved through field installation.
08
Why the scope matters more than the map
Why Project Scope Matters More Than a City Line
Steel fabrication is different from many local home services.
The right contractor does not always need to be located five minutes from the jobsite.
Much of the work happens before installation.
The steel needs to be measured, cut, fitted, welded, and prepared.
Then the finished components need to be delivered and installed.
For larger custom projects, the quality and capability of the fabricator can matter more than whether the fabrication shop sits inside the same city limits.
That is why we consider projects outside our immediate Houston market when the scope makes sense.
Projects We Are More Likely to Travel For
Not every project makes sense for a crew to travel several hours.
The projects that are usually a better fit include:
- Larger structural steel packages
- Custom home steel
- High-value architectural steel
- Large custom gates and estate entries
- Commercial structural projects
- Commercial metal buildings
- Larger miscellaneous metal packages
These projects benefit more from specialized fabrication and installation capabilities.
Fabricated in the Shop, Installed at the Project
Many of our projects begin in the fabrication shop.
The steel is cut, fitted, welded, drilled, and prepared before it reaches the property.
That model allows us to serve projects beyond our immediate neighborhood while maintaining control over the fabrication process.
It also means installation requirements can be considered before the steel leaves the shop.
Growing Our Texas Field Presence
Houston remains our primary market.
At the same time, Texas Outlaw Welding is continuing to grow its ability to serve projects in Dallas and Austin.
We do not need to wait until that expansion is complete to take the right projects.
We are already considering and accepting work in Dallas and Austin today while building the capacity to serve more projects there over time.
09
Who we work with
Working With General Contractors Across Multiple Markets
General contractors may manage projects across Houston, Dallas, Austin, and other Texas markets.
When the steel scope is a good fit, we can work with contractors who need a fabrication and installation partner capable of supporting projects beyond one small service radius.
- Fabrication
- Delivery coordination
- Steel erection
- Field installation
- Miscellaneous metals
The exact scope depends on the project.
Working With Homeowners Outside Houston
Homeowners in Dallas, Austin, and other markets can also contact us about substantial custom steel projects.
The project does not need to be commercial simply because it is farther from Houston.
A large custom residential project may still be a good fit.
Examples include:
- Structural steel for a custom home
- Major architectural steel
- Estate gates
- Large patio covers
- Custom metal buildings
Send us the project information and location.
We can determine whether the project makes sense for our team.
10
Frequently Asked Questions About Our Service Areas
Where is Texas Outlaw Welding based?
Texas Outlaw Welding is based in Houston, Texas. Houston and the surrounding area remain our primary market.
Do you take projects in Dallas?
Yes. We currently take on select residential and commercial projects in Dallas while continuing to expand our crews and field presence in North Texas.
Do you take projects in Austin?
Yes. We currently accept select residential and commercial projects in Austin and are continuing to expand our field capacity in the market.
Do you have an Austin office?
Our primary base is Houston. Austin is an active service and expansion market rather than a separate permanent office location.
What areas around Houston do you serve?
Our primary Houston-area service pages include Houston, Katy, and The Woodlands. We also consider projects throughout the greater Houston region based on the type and scope of work.
Do you have a Dallas office?
Our primary base is Houston. We serve Dallas as an active project market and are growing our field presence there. We do not present Dallas as a separate permanent office location.
Will you travel for a residential project?
Yes, when the project size and scope make sense. Larger structural, architectural, gate, patio cover, and custom building projects are generally better candidates for work outside our primary Houston market.
Will you travel for a commercial project?
Yes. Commercial structural steel, steel erection, metal buildings, miscellaneous metals, and larger custom fabrication projects may be considered in Dallas, Austin, and other Texas markets.
Do you work outside the cities listed on this page?
Possibly. The listed cities represent our primary target markets. If you have a larger steel project elsewhere in Texas, contact us with the location and scope so we can determine whether it is a good fit.
Where does your next steel project need to be built?
Your project does not have to be around the corner from our shop to be worth discussing.
Tell us where the project is located.
Tell us what needs to be fabricated.
Tell us whether plans are already complete.
If you have a substantial residential or commercial steel project in Houston, Katy, The Woodlands, Dallas, Austin, or another Texas market, send us the details.
We can review the scope and determine whether Texas Outlaw Welding is the right team to take the steel from the shop through installation.